A quiet alternative to generators, the PROwatt 800 is built for years of totally silent, maintenance-free operation, without spikes and voltage fluctuations. 
Designed for recreational and industrial applications, the PROwatt 800 produces 800 watts of continuous power from a 12 volt DC source, and can run anything from power tools to small microwave ovens.

Even if you already have a generator in your system, the PROwatt 800 can be used for lower-power or intermittent loads and save the generator (and the accompanying noise, fumes, and exhaust) for heavy-duty continuous loads.



PROwatt 800 
Product Features:

1/2 HP surge capability

Over voltage protection

Under voltage protection

Overload protection

Thermal protection

Totally silent operation
 
 

 

 
PROwatt 800 
 Max. Continuous Power   800 W
 Surge Capability (Peak Power)   1/2 HP
 5 minute   1000 W
 Optimum Efficiency   approx. 90% efficient
 No Load Current Draw   <300 mA
 Output Voltage   115 VAC RMS +/- 5%
 Output Frequency   60 Hz quartz crystal controlled
 Output Waveform   Modified Sine Wave, phase corrected
 Input Voltage Range   10 - 15 VDC*
 Low Voltage Alarm   Yes (10.6 Volts)
 Low Voltage Cut-Out   Yes (10 Volts)
 AC Receptacles   Dual GFCI outlet
 Fuse   Internal - not user replaceable
 Weight (lbs.)   5
 Length (in.)   10
 Width (in.)   9
 Height (in.)   3

Specifications subject to change without notice.
* Also available in 24 VDC input voltage
NOTE: AC outlet is a Ground Fault Circuit Interrupter (GFCI) outlet
 Comes with North America/Japan AC Receptacle

Back