POP-60/POP-120

• 60 or 120W of output power into 4 ohm or 70V/25V loads
• 4 Mixable inputs: 3 balanced mics and 1 auxiliary, plus tuner & deck
• Mic 1 input is a 1/4" T/R/S connector
• Digital AM/FM tuner with 30-station preset memory
• Full-logic recording, playback & multi-mode auto-reverse deck
• Cassette deck is modular & easily removed for service
• Cassette deck is able to record, program and radio
• Priority VOX muting for Mic 1 & 4-tone manual pre-page chime
• Bass & treble tone controls
• Pre-amp out (post-tone-controls) for external signal processing
• Power amp input (normalizing) for patch of external signals
• 2-Zone speaker selector buttons for 25V or 70V lines
• Thermal overload & power-up delay output protection

The POP-60 & POP-120 are monaural cassette mixer receivers designed for applications where a variety of music and paging sources are required, including restaurants, banquet halls, community centers and retail shops.  They have 60W or 120W output power, respectively, and offer a full-logic cassette deck, a digital AM/FM tuner, one auxiliary input and three balanced mic inputs. All sources are mixable, with individual gain controls.  The mic 1 input VOX mutes all other channels with an adjustable muting level. Separate bass and treble controls allow ±12dB adjustment, and a 4-note chime button provides a pleasant pre-page tone. The cassette deck features full-logic-controlled, auto-reverse, record-playback capabilities. A 3-mode selector allows single-side play, auto-reverse or continuous play functions. The unit also has its own independent volume control.
The AM/FM LCD digital tuner offers manual or station-seek up/down tuning. A direct access 30-station memory offers 18 FM and 12 AM presets. The unit also has its own independent volume control.
The amplifier output has auto-resetting thermal protection circuitry and a 4-second power-up output delay for speaker protection. Indication of protection circuit activation, 7-step amplifier output levels and AC power is provided by front-panel LEDs, as well as speaker outputs for either low impedance 4 ohm loads or switch-selectable 25V/70V high impedance loads. Two zone outputs are supplied for high impedance loads, and are independently selectable from the front panel. The POP-60 & POP-120 come packaged in shelf mount enclosures.
 
 

Technical Specifications	POP-60	POP-120
Output power (RMS)	60W	120W
Frequency response	80 Hz to 20 kHz ±3dB	80 Hz to 20 kHz ±3dB
THD @ 1 kHz	< 1% @ RMS	< 1% @ RMS
Signal-to-noise ratio	> 90 dB	> 90 dB
Output impedances/levels	4/8 ohm, 25/70V	4/8 ohm, 25/70V
Power source	115 VAC @ 60 Hz	115 VAC @ 60 Hz
Power consumption	132W	235W
Weight	26.5 lbs (12 kg)	31.7 lbs (14.4 kg)
Dimensions (W x H x D)	16-1/2" x 5-1/4" x 11"	16-1/2" x 5-1/4" x 11"

TUNER
Tuning range:             87.5 MHz -108 Mhz (FM) & 522 kHz - 1620 kHz (AM)
Usable sensitivity:       2 µV (FM) & 12 µV (AM)
Signal-to-noise ratio:  > 60 dB (FM) & > 50 dB (AM)
Antenna input:            300 ohm balanced or 75 ohm, unbalanced (FM) & low impedance (AM)
Number of presets:    18 (FM) & 12 (AM)

CASSETTE DECK
Track system:             2 track mono recording/playback
Recording system:      AC bias system, bias frequency 105 kHz
Tape speed:               1-7/8" /sec (4.76 cm/sec)
Wow & flutter:           < 0.05%
Frequency response:  125 Hz - 6.3 kHz
Signal-to-noise ratio:   > 50 dB