PA-920/PA-935 

• 20 or 35 watts RMS
• 3 Mixable inputs: Mic1, Mic2/Aux1, Mic3/Aux2
• Mic2/Aux1, Mic3/Aux2 are individually switch selectable
• Less than 1% THD @ RMS
• Telephone paging input (adjustable)
• Separate priority VOX muting for Tel and Mic1 inputs (adjustable)
• Mono 4 ohm, 8 ohm, 25V or 70V outputs
• Bass & treble tone controls

The PA-920 and PA-935 are 20 or 35-watt mixer/amplifiers with 3 balanced mic inputs,         allowing connections of three dynamic balanced low impedance mics. Both units have 2 aux level inputs switchable between mic or line in addition to an input from a 600 ohm (0.775v) telephone page port.  Muting is accomplished via vox. from a mic 1 or telephone input for override of music for paging. Overall bass and treble controls are available on both units.
 
 

Technical Specifications	PA-920	PA-935
Output power (RMS)	20W	35W
Frequency response	150 Hz - 15 kHz	150 Hz - 15 kHz
THD	< 1% @ RMS	< 1% @ RMS
Signal-to-noise ratio	> 60 dB	> 60 dB
Output impedances/levels	4/8 ohm, 25/70V	4/8 ohm, 25/70V
Power source	115 VAC @ 60 Hz	115 VAC @ 60 Hz
Power consumption	35W	50W
Weight	7.7 lbs. (3.5 kg)	9.7 lbs. (4.4 kg)
Dimensions (W x H x D)	11-3/8" x 3" x 7-3/4"	11-3/8" x 3" x 7-3/4"