PA-2000/PA-4000

• 60 or 120 Watts of output power at < 0.5% THD
• 6 Fully flexible input channels, with adjustable input sensitivity from mic to aux levels
• 5 Screw terminal inputs plus 1 dual RCA input
• Optional input modules easily convert to XLR or RCA type
• Telephone paging input
• Priority muting (external contact or VOX on tel., Mic 1 & Mic 2 inputs) adjustable
• 4-Note chime (external contact or front-panel button) & siren button
• 5-Band graphic equalization
• Mono 4 ohm, 8ohm, 25V or 70V outputs
• 5 Zone speaker selector buttons for use with 25V or 70V lines

The PA-2000 and PA-4000 are 60 or 120 watt mixer amplifiers with six balanced universal inputs, (1 through 5 screw terminal) allowing connections of any source from mic to aux level via an input gain adjustment. Channel six has the ability to be switched to CD level and connection by a dual summed RCA jack. The unit also features an input from a 600 ohm (0.775V) telephone system page port, while the built-in five band EQ helps filter unwanted noise due to feedback.

Five speaker selector buttons allow up to five zones of speakers to be selected on or off. Page pre-announce or a four-tone chime and siren provide emergency signaling via front mounted pushbuttons. Vox or contact muting is available for override of music for paging while fused and relay protect circuits give amp protection. Two separate in/out loops can connect external processing or record to outboard devices.
 
 

Technical Specifications	PA-2000	PA-4000
Output power (RMS)	60W	120W
Frequency response	60 Hz to 20 kHz	60 Hz to 20 kHz
THD	< 0.5% @ RMS	< 0.5% @ RMS
Signal-to-noise ratio	> 105 dB	> 105 dB
Output impedances/levels	4/8 ohm, 25/70V	4/8 ohm, 25/70V
Power source	115 VAC @ 60 Hz	115 VAC @ 60 Hz
Power consumption	90W	150W
Weight	24.3 lbs. (11 kg)	28.7 lbs. (13 kg)
Dimensions (W x H x D)	16-1/2" x 5-1/4" x 12-5/8"	16-1/2" x 5-1/4" x 12-5/8"